你目前无法使用部分二次筛选功能
立即申请VIP,享用更多功能!
标准名称 | 标准英文名称 | 标准编号 | 代替标准号 | 标准状态 | 实施日期 | 批准/发布日期 | 作废日期 | 详情 |
---|---|---|---|---|---|---|---|---|
中药制丸机 | Chinese medicine pill making machine | GB/T 32239-2015 | 现行 | 2016-07-01 | 2015-12-10 | 查看 | ||
上肢矫形器的分类及通用技术条件 | Classification and general technology of upper limb orthoses | GB/T 34410-2017 | 现行 | 2018-04-01 | 2017-09-29 | 查看 | ||
电磁兼容 试验和测量技术 交流电源端口谐波、谐间波及电网信号的低频抗扰度试验 | Electromagnetic compatibility(EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c.power port low frequency immunity test | GB/T 17626.13-2006 | 现行 | 2007-07-01 | 2006-12-01 | 查看 | ||
手术刀片 | Scalpel blade | YY 0174-2019 | 替代YY 0174-2005;强制性转化为推荐性标准,其文本不做任何调整;公告:国家药品监督管理局公告 2022年第76号 | 现行 | 2020-06-01 | 2019-05-31 | 查看 | |
外科植入物 氧化钇稳定四方氧化锆(Y-TZP)陶瓷材料 | Implants for surgery—Ceramic materials based on yttria-stabilized tetragonal zirconia(Y-TZP) | YY/T 1715-2020 | 现行 | 2021-06-01 | 2020-06-30 | 查看 | ||
测量、控制和实验室用电气设备的安全要求 GB 4793.1-2007的符合性验证报告格式 | Safety requirements for electrical equipment for measurement,control and laboratory use—Conformity verification report for GB 4793.1-2007 | GB 4793.1-2007 | 现行 | 2014-11-01 | 2014-07-24 | 查看 | ||
麻醉咽喉镜 | YY 91123-1999 | WS 2-67-1973 | 现行 | 1988-11-01 | 查看 | |||
适用于湿热灭菌的医疗器械的材料评价 | Evaluation of materials of medical device subject to moist heat sterilization | YY/T 1265-2015 | 现行 | 2016-01-01 | 2015-03-02 | 查看 | ||
外科植入物涂层 第2部分:钛及钛-6铝-4钒合金粉末 | Coatings of surgical implants—Part 2:Titanium and titanium-6 aluminum-4 vanadium alloy powders | YY/T 0988.2-2016 | 现行 | 2017-01-01 | 2016-04-29 | 查看 | ||
医用内窥镜 内窥镜器械 取石网篮 | Medical endoscopes—Endotherapy device—Stone retrieval forceps | YY 0847-2011 | 强制性转化为推荐性标准,其文本不做任何调整;公告:国家药品监督管理局公告 2022年第76号 | 现行 | 2013-06-01 | 2011-12-31 | 查看 | |
电磁兼容 试验和测量技术 全电波暗室中的辐射发射和抗扰度测量 | Electromagnetic compatibility(EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs) | GB/T 17626.22-2017 | 现行 | 2018-07-01 | 2017-12-29 | 查看 | ||
电磁兼容 试验和测量技术 主电源每相电流大于16A的设备的电压暂降、短时中断和电压变化抗扰度试验 | Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase | GB/T 17626.34-2012 | 现行 | 2012-09-01 | 2012-06-29 | 查看 | ||
适用于干热灭菌的医疗器械的材料评价 | Evaluation of materials of medical device subject to dry heat sterilization | YY/T 1263-2015 | 现行 | 2016-01-01 | 2015-03-02 | 查看 | ||
心血管植入物人工心脏瓣膜 第3部分:经导管植入式人工心脏瓣膜 | Cardiovascular implants—Cardiac valve prostheses—Part 3:Heart valve substitutes implanted by transcatheter techniques | YY/T 1449.3-2016 | 现行 | 2017-01-01 | 2016-01-26 | 查看 | ||
硅凝胶填充乳房植入物专用要求 硅凝胶填充物性能要求 第2部分:可浸提物质限量要求 | Particular requirements for the silicone gel filled breast implant—Performance requirement of silicone gel filler—Part 2:Limits requirement for extractable substances | YY/T 1555.2-2018 | 现行 | 2020-01-01 | 2018-12-20 | 查看 | ||
内窥镜手术器械 腔镜切割吻合器及组件 | Endoscopic surgical instruments—Endoscopic cutter stapler and reload | YY/T 1797-2021 | 现行 | 2022-09-01 | 2021-09-06 | 查看 | ||
血管内导管一次性使用无菌导管 第4部分:球囊扩张导管 | Intravascular catheters—Sterile and single-use catheters—Part 4:Balloon dilatation catheters | YY 0285.4-2017 | 替代YY 0285.4-1999 | 现行 | 2019-01-01 | 2017-07-17 | 查看 | |
环氧乙烷灭菌的物理和微生物性能要求 第2部分:微生物要求 | Physical requirements and microbiological performance of ethylene oxide sterilization—Part 2:Microbiological aspects | YY/T 1302.2-2015 | 现行 | 2016-01-01 | 2015-03-02 | 查看 | ||
血管内导管 一次性使用无菌导管 第5部分:套针外周导管 | Intravascular catheters—Sterile and single-use catheters—Part 5:Over-needle peripheral catheters | YY 0285.5-2018 | 替代YY 0285.5-2004;强制性转化为推荐性标准,其文本不做任何调整;公告:国家药品监督管理局公告 2022年第76号 | 现行 | 2019-03-01 | 2018-02-24 | 查看 | |
清洗消毒效果的微生物验证方法 | Microbiological test method for demonstrating cleaning and disinfecting efficacy | YY/T 1495-2016 | 现行 | 2017-06-01 | 2016-07-29 | 查看 |